Rain Bird 1/4-inch micro dripline 4/6 mm - 3 l/h - 15 cm emitter spacing - 30 m

Rain Bird micro dripline for small planting areas

The Rain Bird 1/4-inch micro dripline with a 4 mm inside diameter and 6 mm outside diameter is designed for targeted irrigation of small planting areas. Its integrated emitters deliver approximately 3 litres of water per hour each at an operating pressure of 2.0 bar. With emitter spacing of approximately 15 cm, the flexible tubing provides regular water delivery along its length. It is particularly suitable for planter boxes, containers, raised beds, vegetable gardens and small landscaped areas.

With a total supplied length of 30 m, this dripline provides enough tubing for several separate planting areas. Its compact diameter makes it easy to position between plants and route around containers or individual shrubs. The brown colour helps it blend into soil and mulched areas. Since the emitters are already integrated into the tubing, no separate drippers need to be inserted along the line.

Integrated 3 l/h emitters at 15 cm spacing

The Rain Bird micro dripline features built-in emitters spaced precisely 15.25 cm apart. Each emitter delivers approximately 3.0 l/h at 2.0 bar. Two opposing outlet openings and an internal filtration structure help reduce the risk of clogging. Water is released gradually along the tubing, allowing moisture to reach the surrounding root zone.

The emitters are non-pressure-compensating, meaning their flow rate varies with operating pressure. For consistent performance, use a suitable pressure regulator and keep individual dripline runs within the manufacturer's recommendations. The specified operating pressure range is 0.7 to 2.7 bar. Rain Bird lists a maximum run length of 5.8 m for the version with approximately 15 cm emitter spacing.

30 m of flexible tubing for micro irrigation

With 30 m of tubing, the Rain Bird micro dripline provides sufficient material to irrigate multiple planter boxes, containers or small garden beds. Its 6 mm outside diameter and 4 mm inside diameter make it compact and flexible. The tubing connects to compatible Rain Bird 1/4-inch barbed fittings and can be incorporated into existing micro irrigation systems.

The full 30 m length should not be installed as one continuous lateral. Rain Bird specifies a maximum recommended run length of 5.8 m for this model. Divide the tubing into several shorter sections connected to a suitably sized supply line. This helps maintain more consistent water distribution across separate planting areas.

Simple installation and reliable watering

To install the dripline, connect it to a suitable water supply using a compatible 1/4-inch fitting. Route the tubing along the plants and secure it where necessary with suitable irrigation stakes. Close each line with an appropriate end fitting and flush the tubing before final operation to remove debris that may have entered during installation.

Rain Bird specifies filtration of 200 mesh, equivalent to 75 microns. A suitable filter and pressure regulator help protect the integrated emitters and maintain the required operating conditions. The dripline can also be connected to an automatic irrigation controller, allowing regular watering of containers and small planting areas without manual watering.

Technical specifications and dimensions

• Manufacturer: Rain Bird
• Model: LDQ0806100 / LDQ-08-06-100
• Product type: Micro dripline with integrated emitters
• Supplied length: 30 m
• Original manufacturer coil length: 30.5 m
• Inside diameter: 4 mm
• Outside diameter: 6 mm
• Wall thickness: 1 mm
• Emitter spacing: 15.25 cm, approximately 15 cm
• Emitter flow rate: 3.0 l/h at 2.0 bar
• Operating pressure: 0.7 to 2.7 bar
• Pressure compensation: No
• Emitter design: Built-in filtration
• Outlet openings: Two per emitter, positioned 180° apart
• Required filtration: 200 mesh / 75 microns
• Maximum individual dripline run length: 5.8 m
• Tubing colour: Brown
• Connections: Compatible Rain Bird 1/4-inch barbed fittings
• Applications: Planter boxes, containers, raised beds, vegetable gardens and shrubs

Frequently asked questions

How much water does the dripline deliver?

Each integrated emitter delivers approximately 3 litres per hour at 2.0 bar. With 15.25 cm spacing, this corresponds to approximately 19.7 litres per hour per metre of tubing.

Is the micro dripline pressure-compensating?

No. The integrated emitters are non-pressure-compensating, so their flow rate changes with operating pressure.

Can I install the entire 30 m as one continuous line?

No. Rain Bird specifies a maximum recommended individual dripline length of 5.8 m for this version. Divide the tubing into shorter runs supplied by a suitable distribution line.

Which fittings are compatible?

The dripline is designed for compatible Rain Bird 1/4-inch barbed fittings. Its inside diameter is 4 mm and its outside diameter is 6 mm.

Does the dripline require filtration?

Yes. Rain Bird specifies filtration of 200 mesh or 75 microns to help protect the integrated emitters against clogging.

Can I use this dripline in planter boxes?

Yes. The flexible tubing is particularly suitable for planter boxes, containers and other small planting areas.

How many emitters are there in 30 m of tubing?

At 15.25 cm emitter spacing, a 30 m length contains approximately 197 emitters. The exact number may vary slightly depending on where the tubing is cut at each end.