20 mm PE compression fittings

20 mm PE compression fittings provide compact and flexible connections for smaller irrigation areas. They are suitable for joining, extending and branching 20 mm PE pipes and are practical for smaller sprinkler zones and distribution lines.

No products found.

Connect compact 20 mm PE pipes

20 mm PE pipes are suitable for smaller irrigation areas and distribution lines with appropriate water requirements. Compatible compression fittings allow individual pipe sections to be joined securely and make it easy to create a compact water distribution system.

The smaller pipe diameter is useful where very high flow rates are not required. Its suitability still depends on the pipe length, required water flow and pressure conditions within the irrigation system.

Useful for smaller irrigation zones

A 20 mm pipe can branch from a larger main supply line to serve a smaller section of the garden. This allows the pipe diameter to be adapted to the actual water requirement of the individual irrigation area.

Depending on the system design, smaller sprinkler groups and other suitable irrigation components can be supplied. For higher water demand or long pipe runs, consider whether a larger pipe diameter would be more appropriate.

Create flexible pipe routes with fittings

Straight 20 mm fittings join sections of pipe, elbows provide changes in direction and tees create additional branches. This makes it easy to adapt the pipe layout to smaller lawns and planted areas.

Suitable threaded fittings can also provide transitions to other connection types and irrigation components. Check all dimensions and operating requirements to make sure the selected fittings are compatible with the system.

Install 20 mm fittings correctly

The pipe end should be clean, straight and undamaged before assembly. A suitable pipe cutter makes it easier to achieve a square cut. Install the compression fitting according to the manufacturer's instructions and check that the pipe is seated correctly.

Once the pipework is complete, turn on the water supply and inspect every connection. This is particularly useful before covering underground pipes, as any necessary correction remains easy to access.