25 mm PE compression fittings

25 mm PE compression fittings are an excellent choice for pipework in small and medium garden irrigation systems. Suitable fittings allow you to extend pipes, create branches and reliably supply pop-up sprinklers or individual irrigation zones.

No products found.

25 mm fittings for home garden irrigation

25 mm PE pipes are frequently used for manageable garden irrigation systems and individual sprinkler zones. Compatible compression fittings allow the pipework to follow lawns, paths and beds without requiring complicated installation methods.

Depending on the required water flow, a 25 mm pipe can supply an irrigation zone or form part of the water distribution network. Pipe length, flow requirement and available pressure should also be considered when planning the system.

Create supply lines for pop-up sprinklers

Depending on the irrigation design, 25 mm PE pipe can supply pop-up rotors or sprays. Compression fittings make it easy to extend and branch the pipe before suitable sprinkler connections are used for the individual sprinklers.

Tapping saddles, flex pipes or swing joints can provide flexible connections between the PE pipe and sprinklers. This means the sprinkler does not need to be mounted rigidly on the main pipe and can be positioned more easily at the correct height.

25 mm connectors, elbows and tees

Straight compression fittings join two pipe sections, elbows route the pipe around corners and tees create additional branches. These fittings make it possible to adapt the pipe layout to the shape and requirements of the garden.

Threaded PE compression fittings are available when a transition to a threaded component is required. Depending on their design, they can connect additional irrigation components. Always check both pipe and thread dimensions before ordering.

Connect irrigation pipes yourself

25 mm PE compression fittings are designed for straightforward assembly. Cut the pipe cleanly with a suitable pipe cutter and prepare the pipe end according to the fitting instructions before completing the connection.

Perform a leak test before permanently burying the pipework. This makes it easy to identify and correct any connection that has not been assembled properly. Suitable 25 mm fittings allow you to build your garden irrigation system step by step.