Rain Bird RPKSOLENOI 24V solenoid for irrigation valves

Rain Bird RPKSOLENOI 24V solenoid for irrigation valves

The Rain Bird RPKSOLENOI 24V AC solenoid is a genuine replacement component for compatible Rain Bird irrigation valves. It allows irrigation valves to open and close automatically when controlled by a suitable irrigation controller. Designed for Rain Bird DV, DVF and JTV valve series, the replacement solenoid is suitable for maintaining and repairing automatic irrigation systems in residential gardens and landscaped areas.

If an existing solenoid is damaged or no longer responds correctly to controller commands, replacing the faulty component may restore reliable valve operation. The Rain Bird RPKSOLENOI is identified by manufacturer part number 20858801, also written as 208588-01. Replacing the solenoid can often eliminate the need to replace the complete irrigation valve, saving installation time and unnecessary maintenance costs.

24V AC operation for automatic irrigation controllers

The Rain Bird RPKSOLENOI operates with 24 volts alternating current at a frequency of 50 or 60 Hz. It is controlled by a compatible irrigation controller that supplies electrical power to activate the valve. During a programmed watering cycle, the controller energizes the solenoid, allowing the valve to open. When the electrical supply is switched off, the valve closes under normal operating conditions.

The solenoid has an inrush current of approximately 0.30 A and an inrush power requirement of 7.2 VA. Its holding current is approximately 0.19 A, corresponding to 4.6 VA. The coil resistance is approximately 38 ohms. Unlike a 9V DC latching solenoid, the RPKSOLENOI requires continuous 24V AC power while the valve is electrically activated.

Compatible with Rain Bird DV, DVF and JTV valves

The Rain Bird RPKSOLENOI replacement solenoid is compatible with Rain Bird DV, DVF and JTV irrigation valve series. Supported models include the 075-DV, 100-DV and 100-DVF. Rain Bird also specifies compatibility with the 075-DAS, 100-DAS, 075-ASVF and 100-ASVF valves. These applications make the replacement solenoid suitable for a variety of residential and light-commercial irrigation systems.

Before ordering, check the model number of your existing irrigation valve. The RPKSOLENOI is not a universal replacement for every Rain Bird valve series. PGA and PEB valves require a different compatible solenoid assembly, such as the Rain Bird SOLASSG4. Battery-operated irrigation controllers also require a suitable 9V DC latching solenoid rather than this 24V AC model.

Easy replacement and reliable valve control

Replacing the Rain Bird RPKSOLENOI solenoid is a straightforward maintenance task on compatible irrigation valves. Before installation, shut off the water supply, release any remaining pressure and disconnect the irrigation controller from its power source. Remove the existing solenoid according to the valve manufacturer's instructions and install the replacement component in the correct position.

Use suitable waterproof wire connectors for electrical connections, particularly when the valve is installed in an underground valve box. Once installation is complete, restore the water supply and test the irrigation zone using the controller. Check that the valve opens and closes correctly. Replacing a faulty solenoid can help restore automatic irrigation operation without replacing the entire valve assembly.

Technical specifications and dimensions

• Manufacturer: Rain Bird
• Model: RPKSOLENOI
• Manufacturer part number: 20858801
• Alternative part number: 208588-01
• Product type: Replacement solenoid for irrigation valves
• Operating voltage: 24V AC
• Frequency: 50/60 Hz
• Inrush current: 0.30 A
• Inrush power requirement: 7.2 VA
• Holding current: 0.19 A
• Holding power requirement: 4.6 VA
• Coil resistance: Approximately 38 ohms
• Operating principle: Non-latching AC solenoid
• Compatible valve series: Rain Bird DV, DVF, JTV, DAS and ASVF
• Compatible models: 075-DV, 100-DV, 100-DVF, 075-DAS, 100-DAS, 075-ASVF and 100-ASVF
• Not suitable for: Direct operation with 9V DC battery controllers
• Application: Automatic garden and landscape irrigation

Frequently asked questions

Which Rain Bird valves are compatible with the RPKSOLENOI?

The RPKSOLENOI is compatible with Rain Bird DV, DVF and JTV irrigation valve series. Rain Bird also lists the 075-DAS, 100-DAS, 075-ASVF and 100-ASVF models.

Can I use the RPKSOLENOI with a Rain Bird ESP-TM2 controller?

Yes. The Rain Bird ESP-TM2 provides 24V AC valve outputs and can operate compatible irrigation valves equipped with the RPKSOLENOI, provided the controller's electrical limits are observed.

Does the solenoid fit Rain Bird 100-DV and 100-DVF valves?

Yes. The RPKSOLENOI is designed for the Rain Bird DV and DVF series, including the 100-DV and 100-DVF models.

Can I replace the solenoid myself?

Yes. Replacement is possible on compatible irrigation valves. Always shut off the water supply, release pressure and disconnect electrical power before installation. Follow the manufacturer's instructions.

Is the RPKSOLENOI compatible with PGA and PEB valves?

No. Rain Bird PGA and PEB valves use a different solenoid assembly, such as the compatible Rain Bird SOLASSG4.

Can I use this solenoid with a battery-operated controller?

No. The RPKSOLENOI is designed for 24V AC irrigation controllers. Battery-operated controllers such as the Rain Bird ESP-9V require a compatible 9V DC latching solenoid.

What is the difference between RPKSOLENOI and SOLASSG4?

Both are 24V AC replacement solenoid products, but they are designed for different valve families. The RPKSOLENOI is compatible with DV, DVF and JTV valves, while the SOLASSG4 is designed for PGA, PEB and other supported valve series.